A Model to Predict Restrained Shrinkage Cracking of Fiber Reinforced Concrete
Cracking due to restrained shrinkage occurs very often in an engineering practice, causing serious problems such as increased water permeability of the structure and corrosion of the reinforcement....
Problems with Predicting the Transport of Pumiceous Sediments in the Coastal Environment
Pumice is often a major component of coastal sediments associated with subduction zone volcanic settings. Several recent studies in New Zealand have highlighted the difficulties of predicting...
Composite Materials Show Promise for Clean Kaplan Runners
In order to prevent any possibility of oil leakage into river water, LMZ manufactured Kaplan runners containing oil in the blade servomotor only, while the blade operating mechanism operates...
Oceanic CO2 Uptake and Future Atmospheric CO2 Concentrations
The global pattern of water column inventories of bomb-produced 14C suggests that an upwelling of bomb 14C-free...
Designing Better Hollow Fibre Contactors
In this paper we calculate optimum hollow fibre module designs for gas absorption by maximizing the mass transferred per unit cost. Two costs are considered; the membrane cost and the...
Damage Process of Composite Material with Randomly Oriented Fibers
A numerical procedure is formulated to make clear the damage process of composite materials with randomly oriented fibers. These composites often have complicated fiber oriented states,...
Fatigue Design and Reliability Analysis of CFRP Composites
The statistical fatigue properties of unidirectional (UD) T800/3631 carbon/epoxy composite laminates are investigated in this paper. Fatigue tests were conducted under rotating bending....
Reliability Synthesis of CFRP Laminated Plate
The paper presents a formulation of shift synthesis to improve the reliability of fiber reinforced plastic (FRP) laminated plates with uncertain elastic constants and lamina strength....
Reliability-Oriented Materials Design of Composite Materials
A basic formulation for evaluating safety index of unidirectional fiber reinforced laminate is presented. The proposed formulation is based on in-plane failure criteria of composite laminate...
Mass-Transfer Analysis of Waste Packages Containing Defense Waste Processing Facility Glass as a Waste Form
The fractional release rates of selected radionuclides from waste packages containing Defense Waste Processing Facility (DWPF) glass are calculated using the AREST code, assuming a continuous-diffusive...
Properties of the West Valley Waste Form
The centroid composition of the West Valley Demonstration Project waste form has been selected on the basis of criteria mandating high chemical durability and good processibility. A review...
Vapor Hydration and Subsequent Leaching of Transuranic-Containing SRL and WV Glasses
High-level nuclear waste glass that is subject to disposal in the proposed unsaturated environment at Yucca Mountain, Nevada, initially will be altered through contact with humid air....
Recent Results on the Effect of Gamma Radiation on the Durability and Microstructure of DWPF Glass
The effect of gamma radiation on the durability and microstructure of a simulated nuclear waste glass from the Savannah River Site has been carefully investigated. Three large pieces of...
Volatilization of Cesium and Ruthenium From High-Level Waste Glass
The contamination of the air above high-level waste glass by 134Cs, 137Cs and 106Ru...
The DWPF Product, and Its Qualification Program
The Defense Waste Processing Facility (DWPF) at the Savannah River Site (SRS) will be the first facility in the nation capable of immobilizing high-level nuclear waste. Production of DWPF...
Design Considerations for a Ceramic Fabric Radiator
The design of an Advanced Ceramic Fabric (ACF) thermal management device for use in both interplanetary and near-earth space must consider several important aspects of the environment....
Structural FRP Composites
Fiber-reinforced plastics are only just being discovered by civil engineers. Long used in expensive military and aerospace applications, they are beginning to find their way into structures....
Bond Performance of Reinforcing Bars Embedded in Fiber Reinforced Concrete and Subjected to Monotonic and Cyclic Loads
The primary variables investigated were fiber content and loading history. The reinforcing bar size was ASTM #5. Steel fibers with hooked ends were used with four fiber contents, namely;...
Fiber Reinforced Plastic Grids for the Structural Reinforcement of Concrete
The use of fibre resin plastic grid is investigated as a primary bending reinforcement in concrete members. Laboratory bending data is compared with theoretical results using ACI 318-83...
A Test Method to Evaluate Shrinkage Cracking of Concrete
The possibility of shrinkage for a given drying environment depends on the following factors: free shrinkage, creep, and age-dependent properties of concrete. A common way to account for...
Return to search